Erfahren Sie mehr
Hob

Hob

Available for shower entry designs where transitions are required. The wedi Hob can be installed with wedi Fundo shower bases, as well as conventional mortar bed systems. Waterproof and versatile - wedi Hob may be tiled before any glass doors, panels or glass block is installed and can carry weight of up to 480 lbs./ft. Epoxy glue is recommended instead of screw fasteners when installing shower door tracks.

Technical properties for wedi Hob


Hob Material XPS/ Extruded Polystyrene Foam Core covered with fiberglass mesh fully embedded in a cement based resin coating
Surface Burning Characteristics; ASTM E84-04 and UL 1715 Passed
Tensile Strength (Thinset Mortar to wedi Coating to Foam); ASTM C297 0.45 N/mm²
Shear Strength (Thinset Mortar to wedi Coating to Foam); within ANSI 118.10-1999; wet conditions 0.37 N/mm²
Flexural Strength; ASTM C947 4.32 N/mm²
Waterproofness of Assembled System; IAPMO PS 106-2015 Passes
Drain Assembly Kit, WaterMark Passes
Temperature Exposure Limits -50 C to + 80 C
Long-term compressive strength (50 years) ≤ 2% compression EN 1606 0.08 N/mm²
Compressive resistance or compressive strength at 10% compression EN 826 0.25 N/mm²
Fungus & Bacteria Resistance No Growth , Passes
Robinson Floor Test; ASTM C627 *with 200 x 200 x 6 mm Porcelain Tile Heavy Duty Commercial Use, Passes
R-Value, ASTM C518 25 mm of wedi foam = 4.3

Product sizes

Order no. Designation Length x width x thickness
074311010 wedi Full Foam Hob 1200 × 50 × 60 mm

Areas of use wedi Hob

  • New Construction of Residential/Commercial use buildings
  • Renovation in Residential/Commercial use buildings
  • For barrier free or curbed installations
  • For customized or standard tiled showers
  • Over wooden or concrete substructures

Mandatory articles

Optional articles

Data Protection