wedi Subliner Dry Sealing tape
Sealing tape to form waterproof joints between wedi building boards and wedi Fundo elements to other non-wedi materials such as screed, plasterboard

Product Systems

wedi Tools sealing tape, sealing gaiter and corner sealing tape

„wedi Tools.“

Product information

wedi Tools sealing tape includes a TPE-coated polypropylene fleece. This Sealing tape creates waterproof joints between wedi building boards; and wedi Fundo elements to other non-wedi materials, such as screed and plasterboard, etc.

Sealing tape roll, inside corners, outside corners, sealing collar

Technical data

Technical properties - Sealing tape

Type	TPE-coated polypropylene fleece
Colour	grey
Overall width	100 mm / 120 mm
Coating width	100 mm / 120 mm
Overall thickness	approx. 0,70 mm
Weight	43 g/m
Maximum longitudinal tensile strength	approx. 104 N / 15 mm
Maximum lateral tensile strength	approx. 23 N / 15 mm
Elongation at break, longitudinal	approx. 70%
Elongation at break, lateral	approx. 335%
Resistance to water pressure (1.5 bar)	> 1,5 bar
Resistance to chemicals	specified as per ZDB data sheet
Waterproofness	specified as per ZDB data sheet
UV resistance	> 500 h

Product sizes

Order no.	Designation	Width x Roll length
095110311	wedi Tools sealing tape	10 m × 120 mm
095120050	wedi Tools sealing gaiter	120 × 120 mm
095110376	wedi Tools sealing gaiter	130 × 130 mm
095110377	wedi Tools sealing gaiter	200 × 200 mm
095110372	wedi Tools sealing gaiter floor	370 × 370 mm
095130001	wedi Tools inside corner sealing tape	120 × 120 × 60 mm
095135001	wedi Tools outside corner sealing tape	105 × 105 × 60 mm
095135005	wedi Tools sloped lip-end sealing tape left	160 × 100 × 65 mm
095135004	wedi Tools sloped lip-end sealing tape right	160 × 100 × 65 mm

Area of application

Areas of use Sealing tape

For secure sealing of corner, connecting and butt joints and intersections.

When sealing joints and intersections, wedi Tools sealing tapes must be cemented into the fresh thin-bed mortar / sealant / epoxy resin adhesive and pressed in with a smoothing trowel, depending on the load. When using epoxy resin adhesive, the surface must be cemented over and sprinkled with quartz sand.

The wedi Tools sealing tapes must overlap by at least 5 cm.