Building of shower wall
Fundo Trollo / Nautilo
Building of shower wall wedi Fundo design showers wedi Fundo design showers consist of a floor element and the appropriate separation walls. They are manufactured from the wedi building board base material and are equipped with a fitted and sealed floor drain (vertical or horizontal), a supplementary waterproof coating and a predefined slope. The installation instructions are stated below, taking Fundo Trollo as an example.
Apply Joint Sealant in waves onto the cut-out; then, place the individual wall elements into this cut-out.
The wall elements are connected by a tongue and groove process using Joint Sealant, which is applied to the groove and on the left and right sides of the tongue.
Seal the transition of the shower walls to the inside of the floor board by using Joint Sealant .
Optional height increase by using the extension element is possible. Apply Joint Sealant and wedi Tools reinforcement tape.