How can we help? Please feel free to contact us:
+49 (0)2572 156 0 email@example.com
wedi Fundo design showers consist of a floor element and the appropriate separation walls. They are manufactured from the wedi building board base material and are equipped with a fitted and sealed floor drain (vertical or horizontal), a supplementary waterproof coating and a predefined slope. The version Fundo Trollo libero differs from Fundo Trollo by the reinforced back element for attachment of fittings and shower attachments. This also allows for isolated placement. The installation instructions are stated below, taking Fundo Trollo libero as an example.
Apply Joint Sealant in waves onto the cut-out; then, place the individual wall elements into this cut-out.
The wall elements are connected by a tongue and groove process using Joint Sealant , which is applied to the groove and on the left and right sides of the tongue.
Version Fundo Trollo libero, flush-mounted fittings: Seal holes with Joint Sealant and suitable wedi Tools sealing collars.
Seal the transition of the shower walls to the inside of the floor board by using Joint Sealant .
Optional height increase by using the extension element is possible. Apply Joint Sealant and wedi Tools reinforcement tape.
Fundo Trollo Fundo Nautilo wedi Joint Sealant